How to program Dodge North American Journey 2011-2019 Smart Key with L-JCD Cable


Dodge North American Journey 2011-2019 Smart Key Instruction

DODGE\Select from vehicle\North America\Journey\2011-2019\Smart key

Function:
  1. Add key: program and add one key.
  2. Delete key: delete the programmed keys.
  3. Read PIN code: read car's PIN code.

Operation:

Program process:


Add key or all key lost: read PIN code-> add key.

Delete key: read PIN code-> delete key.
   Tips:

      1. 4-Bit of PIN is required when adding/deleting keys.
      2. Click blue texts to view more operation process.
      3. Enable to program smart key of Journey(2018-), you need to use a L-JCD patch chord to connect K518 with car before program.

Add smart key
  1. Turn ignition off, turn on the HAZARD lights.
  2. Input 4-bit PIN code.
  3. In 30s put the smart key(to be programmed) close to car start button, and press the unlock button once.
  4. Program completed.
Delete smart key
  1. This function will delete all the registered keys.
  2. Input 4-bit PIN code.
  3. Configuring... deleting completed.
Read PIN code
  1. Start to read PIN code.
  2. Trying yo read PIN...
  3. PIN reading completed.
*Please note: this device supports [program smart key] for Journey(2018-), you need to use a L-JCD patch chord to connect K518 with car OBD before program.

1. Find the wiring position at the bottom left under steering wheel.


2. Connect a L-JCD patch chord in the wiring position as shown below.



3. Then use the L-JCD patch chord to connect car OBD with K518's OBD port.


Attention:
Delete key: this function will delete all the registered keys.